Best Technology

Precision Cleaning, Passivation & Finishing Systems

Email UsEmail Us
Call Us612.392.2414
Contact an Expert
  • Equipment
    • Industrial Parts Washers
    • Ultrasonic Cleaning Systems
    • Passivation Equipment
    • Electropolishing Equipment
    • Surface Finishing Systems
    • Mass Finishing Machines
    • Wet Benches
    • Specialty & Custom Industrial Process Systems
  • Chemicals
    • Chemicals, Solvents & Fluids
    • BestSolv™ Engineered Fluids: 3M™ Novec™ Replacement
    • 3M™ Novec™ Engineered Fluids, Chemicals, & Solvents
    • 3M™ Novec™ HFE Engineered Fluids and PFAS Phase Out
  • Industries
  • Articles
    • FAQ – Frequently Asked Questions
    • Ultrasonic Cleaning
      • How Do Ultrasonic Cleaners Work?
    • Passivation
      • What is Passivation?
    • Electropolishing
      • What is Electropolishing?
    • Surface Finishing
      • What is Alodine / Chem film / Chromate Conversion Coating?
      • What is Titanium Anodizing?
    • Industrial Parts Washers
  • Case Studies
    • Industry Applications
    • Industrial Parts Washer Case Studies
    • Passivation Systems Case Studies
    • Part Cleaning Case Studies
    • Part Finishing Equipment Case Studies
    • Ultrasonic Cleaning Systems Case Studies
  • Testimonials
  • About Us
  • Contact Us
Contact an Expert
Request Info

Contact an expert on
Chemicals

More Info
home Best Technology / BestSolv™ Chemicals, Solvents & Fluids / 3M Novec Engineered Fluids, Fluorinert Liquids, Solvents, & Chemicals / Thermal Management / Heat Transfer with 3M Fluorinert and Novec Fluids

Thermal Management / Heat Transfer with 3M Fluorinert and Novec Fluids

Table of contents
  1. 3M™ Novec™ and Fluorinert™ Production Ending – Final Order Deadline
  2. 3M™ Fluorinert™ and 3M™ Novec™ for Heat Transfer and Thermal Management
  3. Fluorinert™ vs. Novec™: What’s the Difference?
    1. 3M™ Novec™ Engineered Fluids for Thermal Management
    2. 3M™ Fluorinert™ Electronic Liquids for Thermal Management
    3. Benefits of 3M™ Specialty Fluids for Thermal Management
  4. Properties of 3M™ Fluorinert™ and Novec™ Thermal Management Fluids
    1. Operating Temperature Range and Boiling Point for 3M™ Novec™ and 3M™ Fluorinert™ Fluids
    2. Comparison of Kinematic Viscosity vs. Temperature in 3M™ Novec™ Fluids
    3. Material Compatibility for Thermal Management
  5. What is Immersion Cooling for IT and Data Center Equipment?
  6. Electronics Reliability Testing with 3M™ Fluorinert™
    1. Gross Leak Testing with 3M™ Fluorinert™
    2. Thermal Shock Testing with 3M™ Fluorinert™
  7. Other Uses of 3M™ Thermal Management Fluids
  8. Thermal Management Fluids Available
  9. 3M™ Novec™ Voluntary Phase Out Announcement
  10. 3M™ Novec™ Price and Ordering
3M Authorized Distributor Fluorinert Electronic Liquids

3M™ Novec™ Availability

  • 3M™ Novec™ 7100 – In Stock
  • 3M™ Novec™ 7200 – In Stock
  • 3M™ Novec™ 7300 – In Stock
  • 3M™ Novec™ 7500 – In Stock
  • 3M™ Fluorinert™ FC-40 – In Stock
  • 3M™ Fluorinert™ FC-72 – In Stock
  • 3M™ Novec™ 72DE – In Stock
  • 3M™ Novec™ 73DE – In Stock
  • 3M™ Novec™ 72DA – In Stock
  • 3M™ Novec™ 649*** – In Stock
  • 3M™ Novec™ 612*** – In Stock
  • 3M™ Novec™ 1230*** – In Stock

***Direct molecule replacement in stock.

Availability varies on other fluids. Contact us for more information and Novec™ pricing.

Order Now

3M™ Novec™ and Fluorinert™ Production Ending – Final Order Deadline

March 31, 2025 is the last day that orders for 3M™ Novec™ and 3M™ Fluorinert™ products will be accepted due to the phaseout.

Take control of your future by switching to BestSolv™ Engineered Fluids today. Don’t wait and risk production delays!

Learn More

3M™ Fluorinert™ and 3M™ Novec™ for Heat Transfer and Thermal Management

Many modern manufacturing and technology practices require managing excess heat, or thermal management, with fluids such as 3M™ Fluorinert™ and 3M™ Novec™.  For manufacturers of semiconductor wafers, controlling process temperatures is critical. For data centers, getting rid of excess heat through immersion cooling can dramatically lower operating costs.

3M Fluorinert fluid for immersion cooling

3M™ Fluorinert™ and 3M™ Novec™ fluids are dielectric and non-flammable, which means they are suitable for direct contact with live electronics. They offer a low-maintenance, low-mess alternative to other coolant fluids such as water, water glycol or oils used for heat transfer. These 3M™ thermal management fluids work in many applications, from cold plate cooling for semiconductors, to immersion cooling for data centers, to spray cooling for avionics, to reliability testing for electronics.

3M™ thermal management fluids deliver excellent cooling performance in a wide range of operating temperatures, without compromise on worker safety or environmental sustainability. These fluids from 3M™ provide a wide margin of worker safety. Use of the correct thermal management fluid improves reliability, addresses environmental concerns, and lowers overall operating costs.

Fluorinert™ vs. Novec™: What’s the Difference?

Best Technology is a U.S. nationwide authorized distributor of 3M™ engineered heat transfer fluids for thermal management. These fluids are sold under two brands:

  • 3M™ Novec™ Engineered Fluids
  • 3M™ Fluorinert™ Electronic Liquids

Though both are used for thermal management, the Fluorinert™ brand is distinct from the Novec™ brand, as they use different chemistries. While Novec™ is based on hydrofluoroether (HFE) chemistry, Fluorinert™ Electronic Liquids are part of a family of fully-fluorinated compounds known as perfluorocarbons, or PFCs, and feature different chemical properties from the presence of fluorocarbons.

Brand Chemistry
3M™ Novec™ Engineered Fluids hydrofluoroether (HFE)
3M™ Fluorinert™ Electronic Liquids perfluorocarbon (PFC)

3M™ Novec™ Engineered Fluids for Thermal Management

  • 3M™ Novec™ 649 Engineered Fluid
  • 3M™ Novec™ 7000 Engineered Fluid
  • 3M™ Novec™ 7100 Engineered Fluid
  • 3M™ Novec™ 7200 Engineered Fluid
  • 3M™ Novec™ 7300 Engineered Fluid
  • 3M™ Novec™ 7500 Engineered Fluid

3M™ Fluorinert™ Electronic Liquids for Thermal Management

  • 3M™ Fluorinert™ FC-40
  • 3M™ Fluorinert™ FC-70
  • 3M™ Fluorinert™ FC-72
  • 3M™ Fluorinert™ FC-3283

Originally used for direct contact cooling due to their stability, Fluorinert™ Electronic Liquids helped enable the development of dense electronics, such as supercomputers and power converters. Fluorinert™ liquids are premier heat transfer fluids, and have long been used as heat transfer media for extreme cooling applications. Their exceptionally high dielectric strength makes them ideal for sensitive applications.

Benefits of 3M™ Specialty Fluids for Thermal Management

Novec™ and Fluorinert™ liquids share many of the same advantages for thermal management. These fluids require little maintenance and provide dependable performance. They have high resistivity and will not damage electronic equipment or integrated circuits in the event of a leak or other failure.

Both brands of 3M™ thermal management fluids offer products with good pour point properties that keep them from freezing at temperatures well below O° C. Novec™, however, has superior pour properties that extend beyond -130° C for some products.

The chemical inertness and non-corrosive nature of both brands of 3M™ thermal management fluids make them safe for workers to handle. However, Novec™ and Fluorinert™ differ when it comes to global warming potential (GWP).

Benefit 3M™ Novec™
Engineered Fluids
3M™ Fluorinert™
Electronic Liquids
Excellent dielectric properties ✔ ✔
Wide range of boiling points ✔ ✔
Low viscosity ✔ ✔
Good materials compatibility ✔ ✔
Low toxicity ✔ ✔
Nonflammable ✔ ✔
Zero ozone depletion potential (ODP) ✔ ✔
Low global warming potential (GWP) ✔  

As shown in the chart, the 3M™ Fluorinert™ Electronic Liquid product line does not have low global warming potentials (GWP) and and does have long atmospheric lifetimes. Because emission of materials with these properties could impact the environment, users must carefully manage and minimize emissions by implementing recovery, recycling and/or proper disposal procedures. Use of Novec™ Engineered Fluids is a great alternative to Fluorinert™ Electronic Liquids for most applications and eliminates issues with GWP and long atmospheric life.

Properties of 3M™ Fluorinert™ and Novec™ Thermal Management Fluids

Not sure which 3M™ thermal management fluid will work with your application? Use the charts below as a guide to operating temperature ranges and boiling points for each 3M™ Fluorinert™ and 3M™ Novec™ product. Our applications engineers are also available to discuss unique temperature range requirements.

Operating Temperature Range for 3M Thermal Management Fluids - 3M Fluorinert Electronic Liquids and 3M Novec Engineered Fluids
Data source: 3M

Operating Temperature Range and Boiling Point for 3M™ Novec™ and 3M™ Fluorinert™ Fluids

Here are the recommended operating temperature ranges for pumped, single-phase immersion cooling systems. For two-phase systems, the boiling point of the fluid should be close to the target temperature.

Product Operating
Maximum °C
Operating
Minimum °C
Boiling Point °C
Novec™ 7000 25 -120 34
Novec™ 649 40 -75 49
Novec™ 7100 50 -105 61
Novec™ 774 65 -60 74
Novec™ 7200 65 -105 76
Novec™ 7300 85 -30 98
Novec™ 7500 115 -75 128
FC-72 45 -80 56
FC-3283 120 -40 128
FC-40 155 -30 165
FC-70 205 15 215

Please note that Novec™ 774 is not readily available through Best Technology at this time; however, Novec™ 7200 can be considered as the closest comparable alternative to Novec™ 774.

Comparison of Kinematic Viscosity vs. Temperature in 3M™ Novec™ Fluids

Here is a comparison of the relative kinematic viscosity vs. temperature among several 3M™ Novec™ Engineered Fluids. Kinematic viscosity is important for understanding fluid flow and resistance at a particular temperature.

3M Novec Engineered Fluids Viscosity vs. Temperature Chart

Material Compatibility for Thermal Management

3M™ Fluorinert™ Electronic Liquids and 3M™ Novec™ Engineered Fluids are compatible with a wide array of materials used in heat transfer.

  • Polymers – Most of the materials commonly considered “hard” plastics will perform well with both Novec™ fluids and Fluorinert™ liquids.
  • Elastomers – Elastomers should be limited to those that are not heavily plasticized. 3M™ engineers can assist with testing specific compounds.

Users should note that Novec™ Engineered Fluids have slightly higher solvency compared to Fluorinert™ liquids. It is recommended to confirm materials compatibility for items that come in direct contact before use.

For more details on 3M™ Novec™ Engineered Fluids materials compatibility, check out the materials compatibility section of Solvent Cleaning with 3M™ Novec™ Engineered Fluids.

What is Immersion Cooling for IT and Data Center Equipment?

Immersion cooling is a process in which servers, computer components, and other IT hardware are immersed in non-conductive fluids such as 3M™ Novec™ Engineered Fluids. Heat generated by the electronic components is transferred to the 3M™ cooling liquid, reducing the need for active cooling components, such as interface materials, heat sinks and fans that are common in air cooling.

By using immersion cooling, data centers can improve energy efficiency and reduce size to keep up with the data demand. Liquid immersion cooling in data centers offers a unique opportunity to reduce cooling costs by 95% and reduce data center size by up to 10 times.

Other power electronics that benefit from 3M™ coolant liquids include power inverters, thyristors and variable-speed drives. For these applications, 3M™ thermal management fluids provide the precise control needed to efficiently and uniformly cool these devices.

Whether for single-phase or two-phase immersion cooling systems, 3M™ has a broad range of thermal management fluids available for high-performance computing applications.

Electronics Reliability Testing with 3M™ Fluorinert™

Immersion is not just for cooling of electronic components, it’s also used in testing the reliability of electronics. With properties that include high thermal stability and dielectric strength, inertness and non-corrosiveness, Fluorinert™ Electronic Liquids are ideal for reliability testing. Components can be tested both physically (leak testing) and electrically while immersed in the liquid. Tested devices will dry quickly with no residue or post-test cleaning required.

Two tests that commonly use 3M™ Fluorinert™ liquids are Gross Leak tests and Thermal Shock tests. Both of these tests are part of the military standard MIL-STD-883, a standard that establishes controls and procedures for testing microelectronic devices for use within military and aerospace systems.

Gross Leak Testing with 3M™ Fluorinert™

Gross Leak Testing is a non-destructive test for leaks in hermetically sealed packages. In Gross Leak Testing, also called Gross Leak Seal Testing, electronic components in hermetically sealed packages are placed in a vacuum chamber, then a fluorocarbon fluid such as 3M™ Fluorinert™ Electronic Liquid is pumped in and immerses the package. Item passes the test if no bubbles are detected; hence another name for this test is “bubble test.”

Thermal Shock Testing with 3M™ Fluorinert™

Thermal Shock Testing tests the reliability of electronics that rapidly move between extreme temperatures like missiles. Electronic components are cycled rapidly between hot and cold baths of fluorocarbon fluid such as 3M™ Fluorinert™ Electronic Liquid. Afterward, visual examination and electrical testing are performed to detect failures.

Other Uses of 3M™ Thermal Management Fluids

Semiconductor manufacturing – Stability and consistency in temperature and performance in heat transfer are key for semiconductor manufacturing. 3M™ thermal management fluids are engineered to remain stable over time; plus they offer wider operating ranges than aqueous coolants like deionized (DI) water.

Military and aerospace – Mission-critical electronics for military and aviation require cooling that is top-performing and reliable. 3M™ thermal management fluids meet the challenge with less mess than oil-type coolants, and are used in high-end avionic spray cooling systems.

Pharmaceutical and chemical processing – Secondary loop and freeze-drying processes used in the pharmaceutical and chemical industries can benefit from thermal management fluids. Unlike solvents and oils typically used, 3M™ Fluorinert™ and Novec™ fluids are non-flammable and have a high safety margin for workers.

3M™ Medical Device Policy

Note that 3M™ thermal management fluids are not intended, nor approved, for incorporation into pharmaceuticals, cosmetics or medical devices. 3M™ will not support such applications.

Thermal Management Fluids Available

For Best Technology’s stocking information and data sheets, please see the 3M™ Fluids for Thermal Management stock chart.

In the interest of product stewardship and ensuring responsible use of 3M™ products, you will be asked about the expected application of 3M™ specialty fluids when you place your order.

3M™ Novec™ Voluntary Phase Out Announcement

On December 20, 2022, 3M™ announced plans to exit per- and polyfluoroalkyl substance (PFAS) manufacturing and work to discontinue the use of the PFAS in its product portfolio by the end of 2025.

As an authorized 3M™ Engineered Fluids distributor, Best Technology remains committed to our customers throughout this transition and continues to receive 3M™ Novec™ products.  We will continue to advocate for our customers to fulfill current orders as well as secure products for future orders. We highly recommend preparing for the phaseout by testing BestSolv™ replacement fluids.

3M™ Novec™ Price and Ordering

For purposes of product stewardship, 3M™ Novec™ fluids cannot be sold directly online and are available for customers in the United States only.

Please contact our chemical sales department for a quote by clicking the “Get a Quote” button, or call 612-392-2414, ext. 2.

Get a Quote

Latest News & Products from Best Technology

BestSolv™ 3283 Electronic Liquid – 3M™ Fluorinert™ FC-3283 Replacement

FC-3283 REPLACEMENT BestSolv™ 3283 is a similar molecule replacement for the discontinued 3M™ Fluorinert™ FC-3283 (CAS 86508-42-1). Get a quote now! BestSolv™ 3283 Electronic Liquid for Immersion Cooling BestSolv™ 3283 Electronic Liquid revolutionizes the way we cool our high-performance electronic devices. With the ever-increasing demand for faster and more powerful computers, traditional cooling mechanisms are […]

Read More

Here's What Our Satisfied Customers Have to Say

  • BestSolv™ Engineered Fluids: 3M™ Novec™ Replacement
    • Solvent Cleaning with BestSolv™ Engineered Fluids
      • BestSolv™ Alpha
      • BestSolv™ Bravo
      • BestSolv™ Delta
      • BestSolv™ Echo
      • BestSolv™ Lima
      • BestSolv™ Omega: PFAS Free
      • BestSolv™ Sierra
      • BestSolv™ Theta
      • BestSolv™ Zeta: PFAS-Free
      • BestSolv™ 7100
      • BestSolv™ 7200
      • BestSolv™ 7300
      • BestSolv™ 71DA
      • BestSolv™ 71DE
      • BestSolv™ 71IPA
      • BestSolv™ 72DA
      • BestSolv™ 72DE
      • BestSolv™ 73DE
    • Thermal Management / Heat Transfer with BestSolv™ Engineered Fluids
      • BestSolv™ Zulu Immersion Cooling Fluid
      • BestSolv™ Zulu MAG Magnesium Protection Fluid
      • BestSolv™ 7100
      • BestSolv™ 7200
      • BestSolv™ 7300
      • BestSolv™ 3283
  • 3M™ Novec™ Engineered Fluids and Fluorinert™ Liquids
    • 3M™ Novec™ Product Line
      • 3M™ Novec™ HFE Engineered Fluids and PFAS Phase Out
    • Solvent Cleaning with 3M™ Novec™ Engineered Fluids
      • 3M™ Novec™ 7100
      • 3M™ Novec™ 7200
      • 3M™ Novec™ 7300
      • 3M™ Novec™ 71DA
      • 3M™ Novec™ 71DE
      • 3M™ Novec™ 71IPA
      • 3M™ Novec™ 72DA
      • 3M™ Novec™ 72DE
      • 3M™ Novec™ 73DE
    • Thermal Management / Heat Transfer with 3M™ Fluorinert™ and Novec™ Fluids
      • 3M™ Novec™ 649
      • 3M™ Novec™ 7100
      • 3M™ Novec™ 7200
      • 3M™ Novec™ 7300
  • Solvent Phase Outs
    • 3M™ Novec™ HFE Engineered Fluids and PFAS Phase Out
    • nPB Replacement
    • TCE Replacement
    • Methylene Chloride Replacement
  • Aqueous Cleaning
    • Aqueous Cleaning Solutions: Alkaline Cleaners
    • How Clean is Clean?
  • Surface Finishing Chemicals
    • CitriSurf: Citric Passivation Chemistry
    • Electropolishing Solutions: Electrolyte Chemicals
    • Conversion Coating Chemistry
      • Hex Chrome Phase Out and Alternatives for Conversion Coating
  • Process Equipment
    • Vapor Degreaser Equipment and Ultrasonic Vapor Degreasers
    • Ultrasonic Cleaning Systems & Parts Cleaners
    • Passivation Equipment for Stainless Steel
    • Electropolishing Equipment
    • Chromate Conversion Coating Equipment for Aluminum

Best Technology Inc.

14040 23rd Avenue N.
Minneapolis, MN 55447
Ph: 612.392.2414
Sales@BestTechnologyInc.com

Quick Links

  • Product Line Card
  • Case Studies
  • Videos
  • Site Map
  • Equipment Financing
  • About Us
  • Contact Us

Products

  • Industrial Parts Washers
  • Ultrasonic Cleaning Systems
  • Passivation Equipment
  • Electropolishing Equipment
  • Surface Finishing Systems
  • Wet Benches
  • Chemistries, Solvents & Fluids

Industries Served

  • Medical Device
  • Aerospace
  • Electronics
  • Automotive

Copyright © 2024 · Best Technology Inc. · Privacy Policy

  • Equipment
    ✛
    • Industrial Parts Washers
      ✛
      • Products
        ✛
        • Agitated Immersion Heated Parts Washer
        • Automatic Parts Washer System with Conveyor
        • Phosphating Lines
        • Oil Removal Systems
      • Case Studies
        ✛
        • Pipe Washing Equipment
        • Machine Shop Parts Washer for True Oil
        • Automotive Parts Washer System
    • Ultrasonic Cleaning Systems
      ✛
      • Product Information
        ✛
        • How Clean is Clean?
        • How Do Ultrasonic Cleaners Work?
      • Products
        ✛
        • Benchtop Ultrasonic Cleaner
        • Benchtop Ultrasonic Parts Cleaning Multi-Tank Systems
        • Ultrasonic Cleaning Consoles
        • Automated Ultrasonic Parts Cleaning Equipment Wash-Rinse-Dry
        • Large Ultrasonic Cleaner with Agitated Immersion
        • Immersible Ultrasonic Transducers
        • Vapor Degreasers
      • Case Studies
        ✛
        • Machine Shop Parts Washer for Swiss and CNC Precision Parts
        • Applicable Articles
    • Passivation Equipment
      ✛
      • Product Information
        ✛
        • What is Passivation? How Does It Work?
        • Nitric vs. Citric Acid Passivation
        • Passivation with Citric Acid
        • Passivation Cost Savings Calculator
      • Products
        ✛
        • Benchtop Ultrasonic Passivation Equipment
        • Passivation Wet Bench for Citric / Nitric Acid
        • Ultrasonic Automated Passivation Equipment
        • Agitated Immersion Multi-Tank Passivation Systems
      • Case Studies
        ✛
        • Automated Ultrasonic Passivation System for Medical Device Parts
        • Cleanroom Space Saving Automated Passivation System
        • Heated Polypropylene Acid Passivation and Rinse Tanks
        • Applicable Articles
    • Electropolishing Equipment
      ✛
      • Product Information
        ✛
        • What is Electropolishing? How Does Electropolishing Work?
        • Electropolishing Cycle and Current Calculator
        • What is Dry Electropolishing? How Does It Work?
        • Passivation vs. Electropolishing
      • Products
        ✛
        • Table Top Electropolishing Equipment & Electropolishing Machines
        • Electropolishing Wet Benches
        • Large Scale Part Electropolishing Systems
        • Dry Electropolishing Machines
      • Case Studies
        ✛
        • EP System – Open Top Wet Bench with Spray Rinse
    • Surface Finishing Systems
      ✛
      • Alodine Lines
        ✛
        • What is Alodine / Chem Film / Chromate Conversion Coating?
        • Alodine Chem Film Tank Line
        • Hex Chrome Phase Out and Alternatives for Conversion Coating
      • Mass Finishing Machines
        ✛
        • Centrifugal Barrel Finishing Machines
        • Vibratory Bowl Polishers
      • Titanium Anodizing
        ✛
        • What is Titanium Anodizing?
        • Titanium Anodizing Equipment
    • Wet Benches
      ✛
      • Product Information
        ✛
        • What is a Fume Hood? How Do Fume Hoods Work?
      • Products
        ✛
        • Fume Hoods
        • Wet Bench for Semiconductor & FM4910 Applications
        • Wet Benches for Citric / Nitric Passivation of Stainless Steel and Titanium
        • Wet Benches for Electropolishing
        • Cascade Overflow Rinse Tanks
        • Quick Dump Rinse Tank
      • Case Studies
        ✛
        • Semiconductor Chemical Processing Wet Bench and Fume Hood
    • Specialty & Custom Industrial Process Systems
      ✛
      • Automated Chemical Neutralization Tank Cart
      • Vapor and Dryfilm PTFE Coating Systems
      • Heated Hot Air Parts Dryer
      • Solvent Recovery Equipment
    • Process Validation Templates
    • Equipment Financing
  • Chemicals, Solvents & Fluids
    ✛
    • BestSolv™ Engineered Fluids: 3M™ Novec™ Replacement
      ✛
      • Solvent Cleaning & Thermal Management with BestSolv™ Engineered Fluids
      • Products
        ✛
        • BestSolv™ Alpha
        • BestSolv™ Bravo
        • BestSolv™ Delta
        • BestSolv™ Echo
        • BestSolv™ Lima
        • BestSolv™ Omega: PFAS Free
        • BestSolv™ Sierra
        • BestSolv™ Theta
        • BestSolv™ Zulu Immersion Cooling, Fire Suppression & Magnesium Protection Fluid
        • BestSolv™ 7100
        • BestSolv™ 7200
        • BestSolv™ 7300
        • BestSolv™ 71DE
        • BestSolv™ 72DA
        • BestSolv™ 72DE
        • BestSolv™ 73DE
    • 3M™ Novec™ Engineered Fluids and Fluorinert™ Liquids
      ✛
      • 3M™ Novec™ Product Line
      • 3M™ Novec™ HFE Engineered Fluids and PFAS Phase Out
      • Solvent Cleaning with 3M™ Novec™ Engineered Fluids
      • Products
        ✛
        • 3M™ Novec™ 7100
        • 3M™ Novec™ 7200
        • 3M™ Novec™ 7300
        • 3M™ Novec™ 71DA
        • 3M™ Novec™ 71DE
        • 3M™ Novec™ 71IPA
        • 3M™ Novec™ 72DA
        • 3M™ Novec™ 72DE
        • 3M™ Novec™ 73DE
      • Thermal Management / Heat Transfer with 3M™ Fluorinert™ and Novec™ Fluids
      • Products
        ✛
        • 3M™ Novec™ 649
        • 3M™ Novec™ 7100
        • 3M™ Novec™ 7200
        • 3M™ Novec™ 7300
    • Solvent Phase Outs
      ✛
      • 3M™ Novec™ HFE Engineered Fluids and PFAS Phase Out
      • nPB Replacement
      • TCE Replacement
      • Methylene Chloride Replacement
    • Aqueous Cleaning
      ✛
      • Aqueous Cleaning Solutions: Alkaline Cleaners
      • How Clean is Clean?
    • Surface Finishing Chemicals
      ✛
      • CitriSurf: Citric Passivation Chemistry
      • Electropolishing Solutions: Electrolyte Chemicals
      • Conversion Coating Chemistry
      • Hex Chrome Phase Out and Alternatives for Conversion Coating
  • Industries
  • Customer Testimonials
  • About Us
  • Contact Us

"*" indicates required fields

1Your Info
2Request Pricing

Contact us for info and pricing on fluids!

Looking for a quote on fluids?

To provide a quote, we need additional details for product stewardship. The requested information helps ensure that the products are used in safe applications.
Quote Requested*
Click Yes if you would like to receive a quote on a fluid.

No pricing needed?

Click the Submit button to continue.

The section below is REQUIRED for a quote

Best Technology requires this information to be filled out for application records.
Please confirm*
Please confirm*
Please confirm*
Will the fluid be mixed into another formulation?*
Please describe your formulation IN DETAIL. Any reformulation using the fluid must be reviewed by Best Technology.
(Hold CTRL on keyboard for multiple selections)
BestSolv™ fluids are currently approved for the following applications. Please select your application:*
Describe your application in detail. What materials will the chemical be used on, and will it be used inside a machine? Specify which fluid will be used (e.g., Novec 7100).
Address where we will ship the fluid to. CANNOT be a residential address. Include full street address, city, state, zip.
Company where fluid will be used, if different from your company name
Address of End User, if different from Shipping Address. Include full street address, city, state, zip.
Anticipated volume of usage of this chemical over the next year

More Info